Skip to content

Viscosity converter: cP, cSt, SSU, Pa·s

Convert viscosity between dynamic units (centipoise, mPa·s, Pa·s, poise and imperial units) and kinematic units (centistokes, mm²/s, stokes, ft²/s), and to or from Saybolt Universal Seconds (SUS/SSU). Converting between dynamic and kinematic viscosity needs the density of the fluid at the same temperature.

Inputs

Results

Use a decimal point or decimal comma, with no thousands separators. Scientific notation (for example 1.5e-3) is accepted. Change any unit with the selector next to the value.

How it works

Choose the quantity you know and enter it in any unit. Enter the density of the fluid at the same temperature to convert between dynamic and kinematic viscosity.

Dynamic viscosity μ (in Pa·s, or cP) is the ratio of shear stress to shear rate; kinematic viscosity ν (in m²/s, or cSt) is μ divided by density. Pump, pipe-friction and Reynolds-number calculations need the right one.

Saybolt Universal Seconds are converted from kinematic viscosity with the ASTM D2161 equation at 100 °F (37.8 °C), corrected to the temperature you enter. The kinematic viscosity must be at that same temperature.

Formulas

Dynamic and kinematic viscosity:

ν = μ / ρ        1 cP = 1 mPa·s = 0.001 Pa·s        1 cSt = 1 mm²/s = 10⁻⁶ m²/s

In everyday units:

ν (cSt) = μ (cP) / SG,  with SG = ρ / 1000 kg/m³

Saybolt Universal Seconds, ASTM D2161:

SUS(100 °F) = 4.6324 ν + (1.0 + 0.03264 ν) / ((3930.2 + 262.7 ν + 23.97 ν² + 1.646 ν³) × 10⁻⁵)
SUS(t) = SUS(100 °F) × [1 + 0.000061 (t − 100)],   ν in cSt, t in °F

Symbols: μ = dynamic viscosity; ν = kinematic viscosity; ρ = density at the same temperature; SUS = Saybolt Universal Seconds (also written SSU).

Worked example

A crude oil has a dynamic viscosity of 50 cP and a density of 850 kg/m³ at 37.8 °C (100 °F). What is its kinematic viscosity in cSt and in SUS?

Inputs: μ = 50 cP; ρ = 850 kg/m³; temperature 100 °F.

  1. SG = 850 / 1000 = 0.85.
  2. ν = 50 / 0.85 = 58.82 cSt (5.882e-05 m²/s).
  3. SUS = 4.6324 × 58.82 + (1 + 0.03264 × 58.82) / ((3930.2 + 262.7 × 58.82 + 23.97 × 58.82² + 1.646 × 58.82³) × 10⁻⁵) = 273.2 SUS.

Result: 58.82 cSt, or 273.2 SUS at 100 °F.

Assumptions and limits

  • Newtonian fluids. Waxy crudes below their pour point, drilling muds and emulsions are non-Newtonian: their apparent viscosity depends on shear rate.
  • Viscosity changes strongly with temperature. Use viscosity and density at the same temperature; this converter does not change the temperature of the data.
  • The ASTM D2161 conversion is defined for kinematic viscosities of 1.8 cSt (32 SUS) and above.

Frequently asked questions

How do I convert cP to cSt?

Divide by the specific gravity at the same temperature: cSt = cP / SG. For example, a crude oil of 50 cP with SG 0.85 has 58.8 cSt.

Is mPa·s the same as cP?

Yes. One centipoise equals one millipascal-second. Similarly one centistoke equals one square millimetre per second.

What is the viscosity of water?

Water at 20 °C has about 1.0 mPa·s (1.0 cP) and 1.0 cSt. At 40 °C it falls to about 0.65 cP.

What is SSU?

Saybolt Universal Seconds is the time in seconds for 60 mL of fluid to flow through a calibrated orifice. It is still used on older pump and lubricant data sheets; above about 75 cSt, 1 cSt is about 4.63 SUS.

Which viscosity does a Reynolds number need?

Re = ρ·v·D/μ uses dynamic viscosity, or equivalently Re = v·D/ν with kinematic viscosity.

References

  • ASTM D2161-20 (reapproved 2025), Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity.
  • ASTM D445, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (current edition).
  • ISO 80000-4:2019, Quantities and units - Mechanics (viscosity units).

For education and quick estimates. Shared by the Oil-Gas.net Engineering Working Group as general practitioner guidance; not a standard and provided without warranty. Check every result against the governing standards, vendor data and your project or site requirements before design, operation or safety decisions.

Embed this tool on your site

Copy the code below into your page. The link to Oil-Gas.net must stay with the tool.

Calculator by Oil-Gas.net