Unit converters
Pressure converter: bar, psi, kPa, atm
Convert pressure between bar, psi, kPa, MPa, atm, kgf/cm² and mmHg instantly — free and without sign-up.
Open tool
Oil volume converter: barrels, m³, litres, gallons
Convert oil and liquid volumes between barrels (bbl), thousand and million barrels, cubic metres, litres and gallons.
Open tool
Energy converter: MMBtu, GJ, kWh, boe, toe
Convert energy between joules, GJ, kWh, Btu, MMBtu, therms, barrels of oil equivalent (boe) and tonnes of oil equivalent (toe).
Open tool
Liquid flow rate converter: m³/h, gpm, bbl/d
Convert liquid flow rates between m³/h, m³/d, L/s, L/min, US gpm, barrels per hour and barrels per day.
Open tool
Gas flow rate converter: MMscfd, Sm³/d
Convert gas flow rates between Sm³/d, Sm³/h, MMSm³/d, scf/d, Mscf/d, MMscf/d and Bscf/d.
Open tool
Temperature converter: °C, °F, K, °R
Convert temperature between degrees Celsius, degrees Fahrenheit, kelvin and degrees Rankine.
Open tool
API gravity converter: °API, specific gravity, density
Convert API gravity, specific gravity and density of crude oil and products, with barrels per tonne.
Open tool
Viscosity converter: cP, cSt, SSU, Pa·s New
Convert dynamic viscosity (cP, mPa·s, Pa·s, poise) and kinematic viscosity (cSt, mm²/s, St, ft²/s) and Saybolt Universal Seconds, using the fluid density.
Open tool
Fluids and hydraulics
Reynolds number calculator
Calculate the Reynolds number for flow in a pipe and find out whether the flow is laminar, transitional or turbulent.
Open tool
Pipe pressure drop calculator (Darcy-Weisbach)
Estimate the frictional pressure drop of a liquid in a straight pipe from flow rate, diameter, length, density, viscosity and roughness.
Open tool
Equipment
Pump power calculator
Calculate hydraulic, shaft and motor input power of a centrifugal pump from flow, head, fluid density and efficiencies.
Open tool
Tank volume calculator: horizontal and vertical cylinders
Calculate the total volume of a cylindrical tank and the volume of liquid at a given level, in m³, barrels and gallons.
Open tool
Compressor power and discharge temperature calculator New
Estimate gas compressor head, discharge temperature, gas power and shaft power with polytropic or isentropic efficiency, for one or more intercooled stages.
Open tool
Pump affinity laws calculator (speed and impeller diameter) New
Predict centrifugal pump flow, head, power and NPSHr after a speed change or impeller trim, or find the speed or diameter for a target flow or head.
Open tool
Process safety
Instrumentation and control
Drilling and well control
Hydrostatic pressure and mud weight calculator New
Calculate hydrostatic pressure, pressure gradient and equivalent mud weight from fluid density and true vertical depth, in oilfield or SI units.
Open tool
Kill mud weight, ICP and FCP calculator New
Kill sheet basics: formation pressure, kill mud weight, initial and final circulating pressure, influx height and gradient, and MAASP from shut-in data.
Open tool
Piping and pipelines
Erosional velocity calculator (API RP 14E) New
Calculate the API RP 14E erosional velocity Ve = C/√ρm, the no-slip two-phase mixture density, the minimum pipe area and the velocity ratio of your line.
Open tool
Pipe wall thickness calculator (ASME B31.3) New
Calculate the ASME B31.3 pressure design thickness t = PD/2(SEW+PY), add corrosion allowance and mill tolerance, and pick the lightest B36.10 schedule.
Open tool
Integrity and inspection
Gas properties and processing
Actual to standard gas flow converter (Am³/h, Sm³/h, Nm³/h, ACFM, SCFM) New
Convert gas flow between actual and standard conditions with pressure, temperature and Z: Am³/h, ACFM, Sm³/h, Nm³/h, SCFM and MMscfd, plus mass flow.
Open tool
Hydrate inhibitor calculator: MEG and methanol (Hammerschmidt) New
Calculate the MEG or methanol concentration to suppress hydrates by a given temperature and the lean inhibitor injection rate (Hammerschmidt, Nielsen-Bucklin).
Open tool
Heat transfer
For education and quick estimates. Shared by the Oil-Gas.net Engineering Working Group as general practitioner guidance; not a standard and provided without warranty. Check every result against the governing standards, vendor data and your project or site requirements before design, operation or safety decisions.
Looking for checklists, worksheets and templates? See the free downloads.