Skip to content

Instrumentation

Selecting and Configuring Level Transmitters for Foam-Prone and Emulsifying Crude Separators
Instrumentation

Compare DP, radar and internal float level technologies for three-phase separators handling foam and emulsion, with commissioning steps to avoid false level and interface readings.

12 Nov 2026 · 10 min read

Calibration Intervals and Drift Management for Pressure Transmitters in Safety-Instrumented Systems
Instrumentation

How to use as-found drift data, proof-test coverage and SIL verification together to justify longer calibration intervals on SIS pressure transmitters without eroding PFD margin, with an illustrative drift calculation.

06 Nov 2026 · 9 min read

Advanced Metering Techniques for Accurate LNG Cargo Tracking and Custody Transfer
Instrumentation

How static tank gauging, ultrasonic check meters, Coriolis meters, and composition analysis combine in LNG custody transfer, with standards context, an illustrative dispute scenario, and a practical specification and maintenance checklist.

01 Nov 2026 · 9 min read

Level Measurement in Three-Phase Separators: Choosing Between DP, Radar, and Displacers
Instrumentation

A practical comparison of DP transmitters, guided wave radar and displacers for bulk-level and oil–water interface measurement in horizontal three-phase separators, covering density drift, emulsion bands and maintenance risk.

15 Oct 2026 · 7 min read

SIL Verification Demystified: Applying ISA-TR84.00.02 for Safety Instrumented Functions in Oil & Gas
Instrumentation

SIL verification is a quantitative engineering discipline, not a software checkbox. This article explains how to apply ISA-TR84.00.02 correctly—covering PFD calculation, common cause failures, proof-test coverage, and a practical checklist for defensible results.

14 Jul 2025 · 9 min read

Safety Instrumented Systems: Protecting Assets and Personnel
Instrumentation

Safety Instrumented Systems (SIS) are engineered hardware and software controls that prevent hazardous events in oil and gas facilities. This article explains SIS components, SIL levels, key standards IEC 61511 and ISA-84, and implementation best practices.

19 Nov 2024 · 6 min read

Integrating Wireless Instrumentation in Remote Oil Fields
Instrumentation

Wireless instrumentation addresses the data acquisition and transmission challenges of remote oil fields. This article covers environmental, technical, and security hurdles alongside proven solutions in equipment design, communication, and power management.

10 Nov 2024 · 6 min read

The Importance of Instrumentation Calibration in Compliance and Safety
Instrumentation

Uncalibrated instruments fail silently. This article covers the regulatory framework, safety consequences of drift, and how to build a defensible calibration management programme for oil and gas operations.

30 Oct 2024 · 8 min read

Implementing Smart Instrumentation for Real-Time Monitoring in Oil and Gas
Instrumentation

Smart instrumentation enables real-time monitoring, predictive maintenance, and enhanced safety in oil and gas operations through advanced sensors, digital communication protocols, and integration with DCS and SCADA systems.

20 Oct 2024 · 7 min read

Innovations in Instrumentation: Enhancing Accuracy in Oil and Gas Measurements
Instrumentation

Static commissioning calibration is no longer enough. From dynamic Coriolis pressure compensation to adaptive PVT models in MPFMs and AI-assisted gamma processing, this article examines what actually improves measurement accuracy across field life.

14 Oct 2024 · 9 min read