Skip to content

Articles

Practical engineering articles across instrumentation, machinery, reliability and operations.

Mooring and Turret Design Choices for Harsh-Environment FPSOs
Mechanical

A design-level guide to turret bearing loads, mooring layouts, and the disconnectable versus permanent weathervane decision for harsh offshore FPSO sites, with a checklist for mechanical and structural engineers.

18 Oct 2026 · 10 min read

Hydrate Control in Subsea Gas Flowlines: Methanol versus MEG Injection
Process Engineering

How to choose between methanol and MEG for subsea gas flowline hydrate control: inhibitor behaviour, injection rate mass balance, regeneration burden and a decision checklist for process engineers.

18 Oct 2026 · 9 min read

Building a Risk-Based Corrosion-Under-Insulation Inspection Program for Aging Units
Asset Integrity and Corrosion

How to prioritise CUI inspection on aging units: screen for vulnerable temperature ranges, find water-ingress hot spots, judge coating condition, and turn the ranking into a targeted, safe inspection scope.

17 Oct 2026 · 10 min read

Asphaltene Stability Screening When Blending Heavy Opportunity Crudes
Refining and Petrochemicals

Screening crude blends for asphaltene incompatibility before a discounted cargo arrives is the only way to protect the margin that made it attractive. This article covers SARA indices, Heithaus titration, optical methods, and computational blend models with a practical decision checklist for refinery planners.

16 Oct 2026 · 7 min read

Bowtie Analysis for Well Control Events: Building a Kick Scenario from the Ground Up
HSE

A step-by-step guide to constructing a well control bowtie for a kick scenario, with concrete barrier examples, escalation factors, and a pre-section verification checklist drawn from current industry practice.

16 Oct 2026 · 8 min read

Level Measurement in Three-Phase Separators: Choosing Between DP, Radar, and Displacers
Instrumentation

A practical comparison of DP transmitters, guided wave radar and displacers for bulk-level and oil–water interface measurement in horizontal three-phase separators, covering density drift, emulsion bands and maintenance risk.

15 Oct 2026 · 7 min read

Screening Mature Fields for CO2-EOR Versus Polymer Flooding
Planning

A structured screening workflow for subsurface planning teams evaluating CO2-EOR versus polymer flooding in mature fields — covering reservoir data requirements, miscibility checks, and comparative selection criteria.

15 Oct 2026 · 8 min read

Selecting Mechanical Seals for Sour Crude Pumps
Mechanical

Repeated seal failures on sour crude pumps trace to wrong arrangement, incorrect elastomers, and poor flush plan selection. This article uses API 682 to compare seal plans and material limits for H2S-laden crude duty.

15 Oct 2026 · 8 min read

Fatigue and Corrosion Assessment for FPSO Life Extension
Asset Integrity and Corrosion

Hull fatigue screening, mooring chain wear assessment, and risk-based inspection planning are the technical foundation for justifying FPSO life extension to classification societies and regulators.

14 Oct 2026 · 9 min read

Diagnosing Amine Unit Foaming and Solvent Degradation
LNG and Gas Processing

A field-oriented troubleshooting guide covering the root causes of amine foaming, solvent analysis methods, and corrective actions for gas plant engineers managing sweetening units.

14 Oct 2026 · 7 min read

Variable-speed drives for ESP artificial lift: sizing and harmonic mitigation
Electrical

A technical guide for facilities electrical engineers covering VSD sizing, long-cable resonance, and harmonic mitigation selection for ESP artificial lift systems, with reference to IEEE 519 compliance across the full operating speed range.

13 Oct 2026 · 7 min read

Boil-Off Gas Management on LNG Carriers: Recondensation Versus Compression
LNG and Gas Processing

How to choose between BOG compression to fuel/GCU, terminal recondensation and onboard reliquefaction on LNG carriers, with the BOR formula in consistent units, a decision framework by voyage length, and a safety-aware checklist.

12 Oct 2026 · 8 min read

Mercury Removal Ahead of Cryogenic Units: Adsorbent Selection and Aluminium Exchanger Protection
LNG and Gas Processing

Mercury in natural gas feed streams attacks aluminium cryogenic exchangers through liquid metal embrittlement. This article covers adsorbent selection, bed sizing methodology, and the operational failure modes that cause premature breakthrough in LNG and NGL plants.

11 Oct 2026 · 8 min read

Screening depleted reservoirs for CO₂ storage: injectivity, capacity and containment
Energy Transition

A practical three-pillar framework — injectivity, storage capacity, and caprock containment — for reservoir engineers screening mature depleted fields as CO₂ storage candidates, using established workflows from IEAGHG and Stanford/SCCS.

11 Oct 2026 · 8 min read

Diluent Blending for Extra-Heavy Crude Transport: Viscosity Targets and Diluent Recovery
Production Operations

How to set pipeline viscosity targets, calculate diluent blending ratios using the logarithmic mixing model, and design diluent recovery circuits for extra-heavy crude transport operations.

10 Oct 2026 · 8 min read

EOR method screening: matching CO2, polymer and thermal floods to reservoir conditions
Production Operations

How engineers screen CO₂ flooding, polymer flooding, and thermal methods against reservoir and fluid properties — covering the key criteria, a comparative matrix, and a structured decision checklist.

09 Oct 2026 · 9 min read

Riser Selection for Deepwater Tiebacks: Flexible Pipe, SCR, or Top-Tensioned
Subsea and Offshore

Compare flexible risers, SCRs and top-tensioned risers for deepwater tiebacks across water depth, vessel motion tolerance, fatigue life and integration with existing host infrastructure.

08 Oct 2026 · 9 min read

Variable Frequency Drive Harmonics on Islanded Offshore Power Systems: Causes and Mitigation
Electrical

VFDs create harmonic distortion that is uniquely damaging on islanded offshore buses. This article explains the causes and compares passive filters, active filters, and phase-shifting transformers as mitigations for practising electrical engineers.

08 Oct 2026 · 9 min read

Managed Pressure Drilling for Narrow Mud-Weight Windows: Equipment and Well Selection
Drilling and Completions

When pore pressure and fracture gradient converge, conventional mud weight cannot hold the line. This article covers MPD well selection criteria, the surface backpressure control loop, and the rig-up constraints that determine whether deployment is viable.

07 Oct 2026 · 8 min read

Casing Design Load Cases for HPHT Wells: Collapse, Burst, and Thermal Loads
Drilling and Completions

A practical load-case walkthrough for HPHT casing design covering collapse, burst, and thermal loads — with worked examples and a design checklist for completion engineers.

05 Oct 2026 · 9 min read

Geohazard Screening and Wellbore Integrity for Drilling in Seismically Active Onshore Basins
Drilling and Completions

A practical workflow for onshore drilling in seismically active basins: fault mapping, shallow geohazard assessment, seismic-aware casing and cement design, barrier philosophy, and real-time monitoring, with a pre-drill checklist.

05 Oct 2026 · 8 min read