Skip to content

Articles

Practical engineering articles across instrumentation, machinery, reliability and operations.

Subsea tieback design: flow assurance, host selection and tie-in architecture for near-infrastructure discoveries
Subsea and Offshore

How to test distance, pressure, chemical injection and riser-versus-manifold choices early in a near-host subsea tieback, so shutdown, slugging and host-capacity problems do not erode marginal field economics.

25 Oct 2026 · 11 min read

Treating Produced Water for Cooling-Water Reuse: Treatment Trains, Scaling and Biofouling Control
Process Engineering

Design criteria for bringing Permian-style produced water to data-centre cooling quality: oil removal, filtration, softening, desalination, and scaling and biofouling control, with a checklist and illustrative scenario.

24 Oct 2026 · 9 min read

Pipeline Buoyancy Control and Trenching Methods for Coastal and Wetland Crossings
Mechanical

How to control pipeline buoyancy in waterlogged and low-strength soils: concrete weight coating, anchors, depth of cover limits, and open-cut versus trenchless installation, with an illustrative coating-sizing calculation and a design checklist.

24 Oct 2026 · 10 min read

Crude Slate Planning When Supply Routes Change: Assays, Constraints and LP Modelling
Planning

How refinery planners can re-optimise the crude slate after a supply route change: refreshing assays, challenging constraints, structuring the LP, and linking it to cargo selection and scheduling.

23 Oct 2026 · 9 min read

Offshore Emergency Shutdown Philosophy and Evacuation Analysis for Hurricane-Exposed Installations
HSE

How to separate precautionary and emergency shutdown, define temporary refuge roles, and build evacuation timing studies that give a defensible margin before hurricane conditions close off helicopter and vessel options.

23 Oct 2026 · 10 min read

FPSO Turret and Mooring System Design for Harsh-Environment Deepwater Fields
Mechanical

How turret position, bearing load paths and mooring line selection interact on new-build harsh-environment deepwater FPSOs, with a comparison of turret types, line options and a design decision checklist.

22 Oct 2026 · 10 min read

Refining Heavy, High-Sulfur Opportunity Crudes: Desalter Performance and Vacuum Unit Impacts
Refining and Petrochemicals

How heavy, high-sulfur opportunity crudes strain desalters, asphaltene stability and vacuum units, and how process engineers can evaluate a slate change with blend testing, monitoring and downstream checks.

21 Oct 2026 · 10 min read

Corrosion under insulation: risk-based inspection strategies for aging process piping
Asset Integrity and Corrosion

How CUI develops, which temperature and service conditions carry the highest risk, and how to build a risk-based inspection programme for older process piping, from data gaps and ranking to method selection and safe insulation removal.

20 Oct 2026 · 10 min read

Troubleshooting TEG Gas Dehydration Units: Glycol Losses, Foaming and BTEX Emissions
Process Engineering

A field-oriented guide to TEG dehydrator problems: mapping glycol loss, diagnosing foaming, managing reboiler chemistry and rich-lean exchanger fouling, and controlling BTEX and VOC emissions with circulation tuning and flash tanks.

20 Oct 2026 · 10 min read

Managing Spill and Ignition Risks in Ship-to-Ship Crude Transfer Operations
HSE

How HSE and marine teams can control spill and ignition risk in crude STS transfers: POAC competence, hazard identification, fender and hose management, personnel transfer and emergency response, aligned with OCIMF and ISGOTT guidance.

19 Oct 2026 · 10 min read

Tank Bottom Corrosion and Inspection Intervals at High-Throughput Crude Terminals
Asset Integrity and Corrosion

How product-side and soil-side corrosion attack crude tank floors, why higher stock turnover undermines historic corrosion rates, and how to keep API 653 internal inspection intervals defensible using updated rate data and RBI.

19 Oct 2026 · 9 min read

Shifting refinery cut points and hydrocracker severity to lift diesel yield
Refining and Petrochemicals

How to raise refinery diesel yield by sequencing fractionator cut-point changes, hydrocracker severity, hydrogen balance and catalyst life, with a consistent mass-basis method for tallying incremental diesel.

18 Oct 2026 · 10 min read

Mooring and Turret Design Choices for Harsh-Environment FPSOs
Mechanical

A design-level guide to turret bearing loads, mooring layouts, and the disconnectable versus permanent weathervane decision for harsh offshore FPSO sites, with a checklist for mechanical and structural engineers.

18 Oct 2026 · 10 min read

Hydrate Control in Subsea Gas Flowlines: Methanol versus MEG Injection
Process Engineering

How to choose between methanol and MEG for subsea gas flowline hydrate control: inhibitor behaviour, injection rate mass balance, regeneration burden and a decision checklist for process engineers.

18 Oct 2026 · 9 min read

Building a Risk-Based Corrosion-Under-Insulation Inspection Program for Aging Units
Asset Integrity and Corrosion

How to prioritise CUI inspection on aging units: screen for vulnerable temperature ranges, find water-ingress hot spots, judge coating condition, and turn the ranking into a targeted, safe inspection scope.

17 Oct 2026 · 10 min read

Asphaltene Stability Screening When Blending Heavy Opportunity Crudes
Refining and Petrochemicals

Screening crude blends for asphaltene incompatibility before a discounted cargo arrives is the only way to protect the margin that made it attractive. This article covers SARA indices, Heithaus titration, optical methods, and computational blend models with a practical decision checklist for refinery planners.

16 Oct 2026 · 7 min read

Bowtie Analysis for Well Control Events: Building a Kick Scenario from the Ground Up
HSE

A step-by-step guide to constructing a well control bowtie for a kick scenario, with concrete barrier examples, escalation factors, and a pre-section verification checklist drawn from current industry practice.

16 Oct 2026 · 8 min read

Level Measurement in Three-Phase Separators: Choosing Between DP, Radar, and Displacers
Instrumentation

A practical comparison of DP transmitters, guided wave radar and displacers for bulk-level and oil–water interface measurement in horizontal three-phase separators, covering density drift, emulsion bands and maintenance risk.

15 Oct 2026 · 7 min read

Screening Mature Fields for CO2-EOR Versus Polymer Flooding
Planning

A structured screening workflow for subsurface planning teams evaluating CO2-EOR versus polymer flooding in mature fields — covering reservoir data requirements, miscibility checks, and comparative selection criteria.

15 Oct 2026 · 8 min read

Selecting Mechanical Seals for Sour Crude Pumps
Mechanical

Repeated seal failures on sour crude pumps trace to wrong arrangement, incorrect elastomers, and poor flush plan selection. This article uses API 682 to compare seal plans and material limits for H2S-laden crude duty.

15 Oct 2026 · 8 min read

Fatigue and Corrosion Assessment for FPSO Life Extension
Asset Integrity and Corrosion

Hull fatigue screening, mooring chain wear assessment, and risk-based inspection planning are the technical foundation for justifying FPSO life extension to classification societies and regulators.

14 Oct 2026 · 9 min read